ozone generators _

2. Only the STERIL ROOM / STERIL ROOM PLUS models can be used with human and/or animal presence.

3. Connect the equipment to the voltage indicated on the number plate (rear).

4. Do not use the equipment near flammable liquids or gases or in front of oil-painted works of art.

5. Do not force the equipment, it will work better and more safely when the rules of the manual are followed. Do not use it for other purposes than those indicated.

6. Take care of the power supply cable, do not pull the cable to make a disconnection.

7. Replace the fuse with the value indicated on the number plate or in the manual.

8. Use the equipment in the temperature range of 0ºC to 45ºC (32ºF to 113ºF) and humidity not higher than 85%

FUNCTIONING

Adjust the timer of the equipment, the blue indicator light will turn on indicating the generation of ozone, at that moment leave the room. The equipment can work in continuous mode, turn the knob counterclockwise to the "Continuous Production" position. To stop the equipment, place the control in the OFF position. If the equipment has an On / Off switch, position it to ON, the timer control will activate the equipment.

TREATMENT AREAS  

Place  the equipment at a height between 40 and 150 cm from the floor so that the ozone comes into contact with the largest possible surface within the area to be treated. Start equipment, close doors and windows, then leave the area. In case of applying the STERIL ROOM NEON AND NEON PLUS models, it is not mandatory to leave

VEHICLES

Put the equipment inside, leave a hole in the vehicle window for the power cable and then start the equipment, roll up the windows and close the doors. It is recommended to activate the ventilation system of the vehicle   in recirculation mode so that the ozone accesses the ducts, filters and surfaces that are difficult to access.